MCB58 - Micro/sys MCB58 - Industrial HC(S)08 SNAP Microcontroller Simple Type: Expansion...
- Part Number:
- MCB58
- Model Number:
- MCB58
- Make:
- MICRO SYS
- Lead Time:
- Available
- Qty In Stock:
- Available
Micro/sys MCB58 - Industrial HC(S)08 SNAP Microcontroller Simple Type: Expansion Module
The MCB58 offers a complete, easy to use hard-ware/software package for low-cost, low-power industrial designs. The Metrowerks CodeWarrior C-compiler and assembler, running on Win98/NT/2000/XP, is used to create programs for the MCB58. These programs are then downloaded and debugged in the MCB58 flash, through the provided serial cable. The MCB58 integrates many peripherals that are often needed for OEM embedded systems as well as general housekeeping functions for ma-chines and instruments. The MCB58 is designed to handle the harsh electrical and mechanical environments of the industrial and automotive industries. Addition-ally, the MCB58 can be either bulkhead or DIN rail mounted. Screw terminals allow the board to connect directly to field wiring.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 13 different options including PC/104, CAN, Isolated I/O, Analog, 8255, RTC
- 5-30VDC input range with safety ground
- Freescale (Motorola) HC(S)08 40MHz controller with 50ns instruction time
- Metrowerks CodeWarrior C-compiler for easy development
- Requires <300 mW of power
- Screw terminals for field wiring
- Small footprint: 3.55” x 2.65” x 0.5”
Specifications
- Analog Inputs (8 Total): 3 Ch, 10-bit, 0 to 10.1VDC, Z IN: 5k?. 2 Ch, 10-bit, 0 to 20VDC, Z IN: 5k?. 2 Ch, 10-bit, ±34VDC, ZIN: 21k ?. 1 Ch, 10-bit, measures input VDC.
- Analog Outputs (4 Total): 4 Ch PWM/DAC, 8mA source/sink. Onboard filters turn PWM into VDAC. 2 Ch 0 to 20mA transmitter, RL <67 ?
- Automotive Load Dump Diodes: +6VDC to 30VDC input range prevents circuit damage from automotive load dump transients
- Control Area Network (CAN bus): Uses Intel 82527 CAN controller, Supports CAN 2.0A/B, ±80V fault protected transceiver, Slope control to reduce EMI, Onboard resistor for node termination, Adds 8 TTL outputs, 8mA source/sink, Adds 8 TTL inputs, TTL – 20 pin locking header with grounds
- Digital I/O: 82C55 provides 24 lines of TTL-level digital I/O, 2.5mA source/sink. 26-pin locking header with grounds
- Environmental: 0° to +70°C operating. -40 to +85 °C operating, -ET version. 5%-95% relative humidity, non-condensing
- Extended VDC Input: +5.5VDC to 30VDC input range. Power the MCB58 directly from factory. +24VDC or military +28VDC systems
- Isolated Digital I/O (8 Total): 4 D OUT, r ON 10 ? , sink 200mA @ 250V PK. 4 DIN, source 3 – 32VDC, 16mA Max. 2 Timer/PWM also go to 2 of the 4 D OUTS. 2 of the 4 D INS also go to counters. 2 of the 4 DINS also go to IRQs
- Mechanical: 3.55 ” x 2.65” x 0.5 ” 6 Mounting holes for PC/104, ENC104-4, DIN rail, or custom OEM board
- Onboard Temperature Detector: Measures from –40° to +85°C, ±2°C
- PC/104 Interface: Emulates the basic controls of an 8-bit PC/104 bus at 30kHz (1/10 the speed): IOW, IOR, Address, Data, IRQ, OSC.
- Power Requirements: Jumper selectable. +5VDC ±5%, 60mA typical, 300mW. +5.5VDC to 30VDC. Replaceable 500mA fuse (5 x 20mm) LC filter to remove line noise Safety ground provided on screw terminal and one mounting hole
- Processor: 40-MHz HC(S)08 CPU. On-chip debug interface. Watchdog with Low voltage reset. 60K program/data flash, 4K SRAM. Benchmark: Floating point 5000/sec. Benchmark: Integer math 100,000/sec. 32 software IRQs 8 Channels of Timer/PWM/Counter.
- Real Time Clock: RTC with onboard battery
- Serial Ports: COM1 – CodeWarrior download/debug. COM2 – RS232/DB9 or RS485
Applications
- None Available
Aliases
- None Available
