MPC116 - Micro/sys MPC116 - High Voltage, High Current, Opto Isolated I/O...
Request Quote
For Price
- Part Number:
- MPC116
- Model Number:
- MPC116
- Make:
- MICRO SYS
- Lead Time:
- Available
- Qty In Stock:
- Available
Micro/sys MPC116 - High Voltage, High Current, Opto Isolated I/O for PC/104 Simple Type: Accessory
The MPC116 provides 32 lines of digital I/O for use in PC/104 applications. It implements 16 digital inputs and 16 digital outputs that can be connected to non-TTL devices such as lamps and relays. Output transistors, rated at 60V max, source current from a user-supplied voltage. Inputs are turned on by sourcing current into them from an external source from 12VDC to 60VDC, set by user-changable series resistors. Two optical isolation options are available. Eight of the MPC116 output lines can be optically isolated with on-board solid state-relays, and eight of the inputs can be optically isolated on -board.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 32 Lines of industrial I/O
- Eight inputs optionally opto isolated
- Eight outputs optionally opto isolated
- Inputs sink current from 24V (nominal) inputs
- Open emitter outputs source up to 350mA, 60VDC max
- PC/104 format
- Series resistors on inputs allow other voltages
Specifications
- Digital Input Lines: Clamping diodes to protect logic
- Digital Input Lines: External voltage source must supply current into input pin to turn "on"
- Digital Input Lines: Series resistor on each input pin, 15K, user-changeable
- Digital Input Lines: Two ports, 8-bits each
- Digital Output Lines: "On" output sources current to connector pin from user-supplied voltage
- Digital Output Lines: 350mA output current, max.
- Digital Output Lines: 4 LEDS display status of 4 output lines
- Digital Output Lines: Diode clamps to ground and to user-supplied voltage for inductive loads
- Digital Output Lines: Must derate to 50mA per output if all 8 outputs in same port are"on" simultaneously
- Digital Output Lines: Read back capability
- Digital Output Lines: Two ports, 8-bits each
- Digital Output Lines: Vce saturation 1.8V at 350mA
- Environmental: 0° - +70°C operating. -25° - +85°C storage. 5%-95% relative humidity, non-condensing
- External Connections: 16-pin header with 16 non-isolated input lines
- External Connections: 16-pin header with 16 non-isolated output lines
- External Connections: 16-pin header with optional 8 opto isolated input lines
- External Connections: 16-pin header with optional 8 opto isolated output lines
- Isolated Input option: Opto isolates 8 inputs
- Isolated Input option: Series resistor in each input line, 2.2K, user-changeable
- Isolated Input option: Turn-on current 5mA min, 80mA max
- Isolated Input option: Two isolated pins per input line
- Isolated Output option: 300mA max load current, source or sink
- Isolated Output option: 400VDC max load voltage
- Isolated Output option: Max relay power dissipation per output 750mW
- Isolated Output option: On resistance, 3.8 ohms, max
- Isolated Output option: Opto isolates 8 outputs
- Isolated Output option: Power FET outputs from solid state relay
- Mechanical: PC/104 standard. 3.55" (plus I/O region) x 3.775" x .6"
- PC/104 Interface: 8-bit PC/104 module. 4 sequential I/O ports, jumper settable
- Power Requirements: +5V ± 5% at TBD max. User-supplied output voltage source, 6V to 50VDC
Applications
- None Available
Aliases
- None Available