MICRO/SYS Industrial Partner

MPC196 - Micro/Sys MPC196 - High density digital I/O Simple Type: Expansion...

larger image

Request Quote
For Price
Part Number:
MPC196
Model Number:
MPC196
Make:
MICRO SYS
Lead Time:
Available
Qty In Stock:
Available

Micro/Sys MPC196 - High density digital I/O Simple Type: Expansion Module

The MPC196 is a plug-on PC/104 board that adds high density digital I/O to PC/104 systems. Four 82C55s provide bi-directional interfaces to and from A/D, D/A, and general system I/O. Each of the 96 lines can be individually controlled and are bi-directional in groups of eight. System reliability for this additional I/O is enhanced with grounds between each 82C55 signal. Consistent system start-up status is controlled with pull-down/pull-up resistors on all I/O lines. The robustness of the MPC196 protects against power sequencing problems in PC/104 systems. This is accomplished with on-board current-limiting resistors that prevent overload currents.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 96 user TTL-level I/O lines
  • Current-limiting resistors
  • I/O direction selectable
  • Individual grounds for all signals
  • IRQs from I/O or external
  • PC/104 format, extended temperature operation available
  • Selectable pull-downs/ups on I/O

Specifications

    General
  • Digital I/O: 96 total in twelve 8-bit groups. Outputs sink/source 2.5mA. Selectable input/outputs can source IRQs. Jumper selectable 4.7k pull-downs/ups on I/O for initialization after reset. 470-ohm current-limiting resistors. Individual grounds for all signals
  • Environmental: 0° - +70°C operating. -40° - +85°C operating, -ET version. -40° - +85°C storage. 5%-95% relative humidity, non-condensing
  • External Connections: Four 50-pin headers for digital I/O
  • Mechanical: PC/104 standard. 3.55” (plus I/O region) x 3.775” x .6”
  • PC/104 Interface: 8-bit PC/104 transfers. IRQ source from I/O, timers, external. Two interrupts jumperable to IRQ3,4,5,6,7,9,. Jumperable to IRQ10,11,12,14,15 if MPCOPT16ST installed
  • Power Requirements: +5v ±5% at 150mA max

 

Applications

  • None Available

Aliases

  • None Available