MPC425 - Micro/Sys MPC425 - PC/104 CompactFlash to IDE Interface Simple Type:...
Request Quote
For Price
- Part Number:
- MPC425
- Model Number:
- MPC425
- Make:
- MICRO SYS
- Lead Time:
- Available
- Qty In Stock:
- Available
Micro/Sys MPC425 - PC/104 CompactFlash to IDE Interface Simple Type: Extender / Converter Board
The MPC425 allows CompactFlash cards to be accessed as IDE drives, by providing a way to interface CompactFlash to an IDE header. CompactFlash is an ideal mass storage media for embedded products because of its low power consumption, fast read time, and remove-ability. The MPC425 comes in two configurations, the MPC425 and the MPC425-1. The MPC425 plugs into a PC/104 stack where it receives its power. This is appropriate configuration for applications where mass storage is needed, but not removed often, if at all. The CompactFlash connector is near the middle of the board to reduce the space required. The MPC425-1 is used where the CompactFlash must be easily changed, and is powered through an IDE Power Connector. This version has four holes for mounting. The CompactFlash connector is at the edge of the board for easy access.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- +5V only operation
- IDE interface
- One Type I CompactFlash socket with retaining clip
- PC/104 format or standalone
- Supports CompactFlash
Specifications
- Environmental: -40° - +85°C operating. -40° - +85°C storage. 5%-95% relative humidity, non-condensing
- External Connections: 40-pin header for IDE Interface
- Mechanical: PC/104 standard. 3.55" (plus I/O region) x 3.775" x .6"
- Power Connector: 8-bit PC/104 connector on MPC425 (for 5V power only)
- Power Requirements: +5V ± 5% at 0mA (no CompactFlash installed)
Applications
- None Available
Aliases
- None Available