MPC500 - Micro/Sys MPC500 - Combination I/O, or Signal Conditioning Interface for...
Request Quote
For Price
- Part Number:
- MPC500
- Model Number:
- MPC500
- Make:
- MICRO SYS
- Lead Time:
- Available
- Qty In Stock:
- Available
Micro/Sys MPC500 - Combination I/O, or Signal Conditioning Interface for PC/104 Simple Type: Expansion Module
The MPC500 Combination I/O, or Signal Conditioning Interface can be used in one of two ways: 1) as a general purpose interface providing a mix of analog and digital I/O, or 2) as an interface to external signal conditioning racks. The MPC500 provides 23 TTL outputs, and 8 bidirectional TTL lines. In addition, a single channel 12-bit A/D converter, and a single channel 12-bit D/A converter are optional. When used for external signal conditioning racks, the MPC500 creates two ribbon cable busses to connect to I/O signal conditioning racks. The OPTO 22 PAMUX analog and digital rack pinout is created on a 50-pin header. OPTO 22 modules are solid state relays, AC or DC input, and various sensor inputs. The 5B analog rack pinout is created on a 34-pin header. The 5B series includes direct connect to thermocouples, RTDs, strain gauges, and 4-20mA current loops.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 5B compatible connector for analog I/O modules on ribbon cable
- Direct connect to signal conditioning module racks
- General purpose combination interface: 31 TTL I/O, one 0-5V analog input, one 0-5V analog output
- PAMUX compatible connector for both analog and digital I/O on ribbon cable
Specifications
- 5B Interface: 34-pin connector with analog I/O, module select, read, and write signals. Requires optional converters
- A/D and D/A Converters: 12-bit, single channel, 0-5V full scale. Approximately 1,000 conversions/second
- Digital I/O: 23 TTL outputs, source/sink 4mA. 8 bidirectional TTL lines, program-controlled direction
- Environmental: 0° - +70°C operating. -25° - +85°C storage. 5%-95% relative humidity, non-condensing
- External Connections: 50-pin header, 9 TTL out, 8 bidirectional TTL (PAMUX cable). 34-pin header, 1 analog in, 1 analog out, 14 TTL out (5B cable)
- Mechanical: PC/104 standard. 3.55" (plus I/O region) x 3.775" x .6"
- PAMUX Interface: 50-pin connector with data, address, read, write, and jumper-enabled reset signals. 24mA drive. 6' total cable length, max
- PC/104 Interface: 8-bit PC/104 module. 6 sequential I/O ports, jumper settable. IRQ jumpers
- Power Requirements: +5V ± 5% at 105mA max. +12V ±5% at 15mA max (-2 version only)
Applications
- None Available
Aliases
- None Available